Author Archives: administrator

SYMC – BC360A

Posted on September 15, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal
	T/T	China

 

Keterangan :

BC360A batching controller is suitable for the application of multiple ingredients batching in one weighing container. Due to its compact size and flexible batchweighing function, it is particularly suitable for feed ingredients, chemical compounding, commercial concrete and road asphalt production processes.Features: Compact Panel Mount structure, save installation space New generation of embedded high speed processor, strong on anti-interference Optimized digital filter and quick following technology Two-speed feeding Supports up to four ingredients batching and discharge Supports automatic, semi-automatic and manual mode Support batch and cumulative function Store 10 groups of formula with non-volatile. 4xDI / 12x DO, support redefinition Auto zero tracking available Power-up zero available Isolated RS232/RS485 Standard MODBUS RTU protocol

AND AD-4404

Posted on April 25, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal
Call	T/T	Japan

 

Keterangan :

100 times/sec. High speed sampling. High display resolution to 16,000 counts. Up to 1 million counts of A/D resolution. Easy to get judgment by Hi/OK/Lo or HiHi/Hi/Lo/LoLo comparator lights with buzzer. Foreign material detection input is newly added. Bar graph shows where the weight of an object falls within the OK range. Built-in timer controls weighing process by signal from an external photoelectric switch or by programmable weight recognition function that is beneficial for transparent objects. Weight, accepted piece, accumulated piece count, name of the object weighted, and standard deviation can be displayed at the touch of button. Up to 100 sets of target (OK weight), Hi, Lo and tare can be stored by individual code number. 5 digits of target and 4 digits of upper and lower limit can be set by the front key operation and number of digit and its location can be customized. Bright and large 13mm (0.52 inch) florescent display. 1/16000 display resolution capability precise enough for any application. Sealed keys keep out dust in industrial environments. 100 times/second fast sampling. Standard current loop output and standard RS-485. Full digital calibration makes zero and span calibration a breeze. Complete RFI/EMI protection. Many features simplify operation. Display (default) – Stores and recalls up to 100 sets of pre-sets items by individual code number. -Total number of pieces checked -Total number of pieces accepted -Target weight -Bar graph indicates deviation from target weight Heavy-duty construction Easy installation Simple calibration 11 inputs and 11 open collector output standard (Optional dry contact relay) Auto zero maintenance with adjustable parameters Comparator buzzer Front panel key lock out prevents operator tampering Fully selectable decimal joint positioning Programmable gravity compensation Selectable units of measuring: None, g, kg, t, lbs (USA)

AND AD-4530

Posted on April 25, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal	Keterangan
Call	T/T	Japan	Low cost digital indicator for various applications. Suitable for measurement of load, pressure, torque, tension and more at an affordable price. Digital Zero (DZ) stores zero data at any measurement point. This function can also be used to tare weight.Measurement can simply be restarted when it was interrupted by a loss of power. Power on zero function adjusts to zero when the power is turned on. Digital filter provides stable measurement results. Digital span calibration. Easy calibration just by inputting the rated output of a sensor. No need to use a mass. Unit characters – Up to five alphanumeric characters can be added to serial output. Comparator function displays and outputs HI, OK and LO according to upper and lower limit settings. Hysterisis width and time can be set to prevent chattering on the output terminal. This reduces load on the relay circuit. Hold function. Selectable from sample hold, peak hold, bottom hold and bipolar peak hold. The peak hold function allows the user to capture the peak value and easily obtain the maximum value of a destruction test or tightening torque. Latch function holds display value/comparator (optional)/analog output (optional)/serial output (optional) corresponding to external latch input. Various data output (optional). Necessary data can be easily obtained using optional comparator relay output, serial output (RS-485/RS-232C), D/A voltage output and D/A current output.

AND AD-4531A

Posted on April 25, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal	Keterangan
Call	T/T	Japan	Digitally processed signals with 16 times/s A/D conversion Peak hold and hold capability “Hold Mode” data stored digitally to prevent drooping on display and analog output Comparator function and output. Analog output with scaling and offset functions Full digital calibration-Digitally span calibrated by entering a sensor output voltage through the keyboard or input using the optional RS-232C interface. Data digitally held in memory. Hold and analog output are stored without any drooping. Easy on relieves user of repetitive adjustments. Compact DIN size body for digital key operating greater installation flexibility. Averaging time and display update rate can be selected for various applications. Digital display hold, peak hold and bottom hold. Replace circuit board and front key board without disconnecting any wires. Easy, fast and low-cost maintenance. Analog output with offset and scaling functions. Variety of data outputs: Average, digital peak hold, analog, hysteresis compensation comparison. Analog low-pass filter removes noise from signal inputs. RFI/EMI screened to comply with U.S., Canadian and other international regulations. Either standard data or digital peak data outputs are available through optional RS-232C, current loop or 4-20mA analog output interface.

AND AD-4531B

Posted on April 25, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal	Keterangan
Call	T/T	Japan	Suitable for load, pressure, torque or tension measurement plus more Digital span calibration possible without using an actual load Zero correction value can be backed up Various output options available Performs A/D conversion at 100 times per second analog output interface.

AND AD-4532B

Posted on April 25, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal	Keterangan
Call	T/T	Japan	New Tricolor (Orange, Green & Red) LED Display Highly visible easy-to-read display Enhanced comparator functions In addition to a simple comparison of the upper/lower limit, the AD-4532B is equipped with a 2D comparator function that shifts between the upper/lower limit in five levels using a time control or an external signal. 2D (5-level) comparator function This function makes it possible to determine the acceptability of the total result by performing a sequential comparison while shifting between the upper/lower limit in five levels using a time axis or an external input (trigger). It is ideal for use in measurements, such as a press-in operation, which require changes in the comparison value as time elapses. The five comparators can also be used individually. High-speed A/D*1 and D/A*2 conversion function at 2000 times/sec. *1 Analog-to-digital conversion *2 Digital-to-analog conversion Calibration without an actual load The digital span calibration function makes it possible to perform a calibration by entering the rated output (mV/V) of the sensor using the numeric keys. This function is useful when an actual load cannot be applied. Latching function The display, the comparator output and the D/A voltage output can be latched (data output hold). Relay output with a long-life MOSFET relay Chatter-prevention function If bouncing of the comparator value occurs repeatedly near the upper/lower limit, a heavy burden will be placed on the relay circuit and other parts. To prevent this, the AD-4532B has a function to set the hysteresis width and time. Hold Function The hold mode can be activated using the front panel key, a Modbus-RTU, or the external input terminal on the rear panel. Wide variety of data input/output The AD-4532B comes equipped with an analog amplifier voltage output (±10V), a D/A analog voltage output (±10V), a comparator output and a Modbus-RTU input/output. In addition, we offer an optional BCD output, RS-232C input/output, D/A analog voltage/current output (±10V / 4 to 20mA) and Ethernet. The upper/lower limit setting, the zero compensation function and the hold function can be executed via Modbus-RTU.

AND AD-4402

Posted on April 25, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal	Keterangan
Call	T/T	Japan	100 times/sec. High speed sampling. High display resolution to 16,000 counts. Up to 1 million counts of A/D resolution. Large and easy to see blue Vacuum Fluorescent Display (VFD). Uses a ten – key pad and function button that are designed for ease of operation and understanding. The main display has a 7 – digit VFD with 18mm tall characters. The sub display has a total of 54 5mm – tall dot matrix characters and displays the values and error comments. Pre-programmed with multiple sequences and functions for filling machines, simple mixing machines and a weight-checker and other applications.

AND AD-4406

Posted on April 25, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal	Keterangan
Call	T/T	Japan	High cost-effectiveness Big LCD 25mm in height Multi power supply Alkaline C type battery: battery life 180 hours (LC 350ohms x 1) battery life 70 hours (LC 350ohms x 4) Optional AC adapter F1, F2 selectable function keys Load cell 350 ohms x 4 Optional stand available Universal Flexi Coms UFC allows you to customize the protocol of the printing format as well as outputting the data with RS-232C Multi interval 2 weighing ranges selectable Accumulation Function Accumulative data is stored into memory automatically or manually Comparator Function Upper/Lower, HiHi/Hi/OK/Lo/Lolo & comparison Comparator output to optional relays Simple batch weighing Automatic batching and customer programming capability Buzzer function Code memory function

AND AD-8121B

Posted on April 25, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal	Keterangan
Call	T/T	Japan	A wealth of functions, including: Interval printing function, Statistical function, Calendar clock function and Chart print function. Impact dot matrix printer for superior readability and long term durability. A full range of statistical functions: Weight data, Total weight data, Counting data, Total counting data, Number of operations, Standard Deviation, Coefficient of Variant, Chart, Year, Month, Date, Hour, Minute and Second. Changeable to dump mode while using statistical function without deletion of statistical function data. Buffer memory of up to approximately 30 sets of data. Interval printing with built-in Timer/Clock function: 5s, 10s, 30s, 1m, 5m, 10m, 30m. Chart selectable to show change in weight, interval time, start time and stop time. Compact size and light weight. AC power supply and battery operation permits use anywhere. 24-hour clock, calendar and pre-set functions(date and time) are stored in non-volatile memory (protected by a lithium battery). Accepts RS-232C and current loop input from A&D’s Electronic Balances, Scales and Indicators. Speedy printinge.

AND AD-4405

Posted on April 25, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal	Keterangan
Call	T/T	Japan	Bright green VDF 20mm (height) display Optional Dot Matrix Compact Printer 10 keys for preset tare and units weighing setting etc Counting function Universal Flexi Coms UFC allows you to customize the protocol of the printing format as well as outputting the data with RS-232C Multi interval 2 weighing ranges selectable Accumulation Function Accumulative data is stored into memory automatically or manually Comparator Function Upper/Lower, HiHi/Hi/OK/Lo/Lolo & comparison Comparator output to optional relays Simple batch weighing Automatic batching and customer programming capability Standard RS-232C Buzzer function Code memory function

AND AD-4407

Posted on April 25, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal	Keterangan
Call	T/T	Japan	Bright green VDF 20mm (height) display Bracket standard 10 keys for preset tare and units weighing setting etc Counting function Universal Flexi Coms UFC allows you to customize the protocol of the printing format as well as outputting the data with RS-232C Multi interval 2 weighing ranges selectable Accumulation Function Accumulative data is stored into memory automatically or manually Comparator Function Upper/Lower, HiHi/Hi/OK/Lo/Lolo & comparison Comparator output to optional relays Simple batch weighing Automatic batching and customer programming capability Standard RS-232C Buzzer function Code memory function

Thames Side S Beam Loadcell

Posted on April 22, 2017 by administrator

Reply

Download Brochure

Harga	Cara Pembayaran	Negara Asal	Keterangan
Call	T/T	U.K	A range of Stainless steel S beam load cells for commercial weighing to OIML R60 3000 divisions. Welded construction ensures total environmental sealing coupled with excellent long term stability. A high temperature variant for operation in environments up to 150 C is also available. For applications in aggressive environments where stress corrosion or acid attack is an issue, a special parylene coating can be specified as an option.